Street Tracker Update

IMG_1316

Added some color to the engine……all the raw aluminum will be coated in BMW Frozen Gray

IMG_1317

Derby cover and primary chain access port in wrinkle finish

IMG_1320

Making frame plugs to reinforce joints where new rear triangle pieces join

IMG_1318

1 1/8″ diameter solid blanks are cut to three inch lengths, then rough turned down on the lathe to the inside diameter of the frame

IMG_1322

Rough turned blank

IMG_1323

The rough turning leaves ribs that bite just a bit when pushed into the frame tubing

IMG_1324

And in….when the rear frame tubes are completed, installed, and aligned, holes will be drilled through the new and existing tubing then plug welded, after that the joints will be tig welded

Leave a Reply

Your email address will not be published.